Volvo Penta TAMD42B Marine Diesel Parts
- Sales region
- General
Difficulties in parts search?
- Bilge pump and engine room fan
- Engine mounting: kamd42b/hs1a
- Extra instrument panel, hour meter and volt meter
- Fuel filter and water separator, rina-approved
- Fuel filter and water separator, rina-approved
- Fuel filter and water separator, rina-approved
- Handle for control with power trim: top installation
- Hot water outlet
- Induction and exhaust manifold: a
- Lubricating system: a
- Propeller shaft stuffing box: d=35mm
- Repair kits
- Steering system sts330
- Alarm panel
- Engine mounting: kamd42b/borg warner
- Handle for control with power trim: side installation
- Lower gear unit: ratio 1.68:1
- Oil pump, components
- Parallel rod for twin installation
- Tool kit
- Turbocharger and air filter
- Water heater
- Connecting kit for narrow hulls
- Control connection, speed and stop control: single station
- Electrical system
- Extra pulley: type hc50
- Fuel system: a
- Oil filter
- Sea water filter
- Shaft coupling, clamp type: d=40mm
- Turbocharger, components
- Compressor, components
- Control cables, type 233, 333, 443: type 233
- Exhaust and cooling water pipe
- Extra pulley: type b
- Fuel filter
- Link rod kit for twin installation
- Oil cooler
- Oil cooler, components
- Rudder indicator kit for reverse gear
- Control connection, speed and stop control: fly bridge
- Cylinder head: a
- Electric bilge pump 12v/24v: 12v
- Exhaust thermo switch control
- Fuel injection pump, components
- Fuel injection pump, components
- Fuel injection pump, components
- Heat exchanger
- Instrument panel 12v
- Instrument panel 12v
- Instrument panel 12v
- Propeller shaft stuffing box: d=40mm
- Steering and steering cylinders for single inst.
- Clock kit
- Control cables, type 233, 333, 443: type 333
- Cylinder block and flywheel housing: a
- Electric bilge pump 12v/24v: 24v
- Lower gear unit: ratio 1.78:1
- Steering and steering cylinders for twin inst.
- Water cooled silencer and exhaust line
- Water pump: a
- Control for side installation, pc740: pc740
- Hydraulic cylinders and ground cable kit
- Instrument panel for dual station
- Regulator
- Servo pump and oil cooler for single installation
- Thermostat housing: a
- Timing gear casing and gears: a
- Aftercooler: a
- Camshaft and valve mechanism
- Control cables, type 233, 333, 443: type 443
- Servo pump and oil cooler for twin installation
- Shaft coupling, clamp type: d=45mm
- Tank meter kit for fuel
- Tank meter kit for fuel
- Control for side installation, pc740: pc740, sailing boat
- Crank mechanism: a
- Fuel tank 40l, with connections
- Instrument panel for dual station, 12v
- Propeller shaft stuffing box
- Sea water pump: a
- Servo pump
- Drive extension: 1' (25.4mm) dp
- Dual station unit
- Fuel filter and water separator
- Fuel filter and water separator
- Fuel filter and water separator
- Instr. panel for twin engine install. mirror-invert
- Sea water pump, components
- Control for side installation, pc840
- Expansion tank
- Expansion tank
- Hydraulic pump and trim instrument
- Alternator
- Control for top installation, pc740: single
- Shaft coupling, locking pin: d=35mm
- Control for top installation, pc740: twin
- Drive extension: 4' (101.6mm) dp
- Oil level guard, 12v
- Vacuum valve
- Control for top installation, pc840: 853168
- Instrument panel 2-pole
- Sea water filter and water intake
- Shaft coupling, flexible
- Control for top installation, pc840: 853169
- Extra alternator
- Extra alternator
- Transom shield
- Transom shield
- Emergency stop contact
- Handle for control
- Shaft coupling, locking pin: d=40mm
- Control for side installation, pc741, pc841: pc741
- Drive extension: 1'' (25.4mm) dpx
- Control for side installation, pc741, pc841: pc741, sailing boat
- Main battery switch
- Shaft coupling, locking pin: d=45mm
- Control for side installation, pc741, pc841: pc841
- Duoprop drive unit ratio 1.78:1
- Control for top installation, pc840 power trim
- Electrical materials
- Electrical materials
- Electrical materials
- Propeller for duoprop drives: a-propellers
- Greaser and stuffing box: d=40mm
- Instruments for separate mounting
- Alternator 14v 60a, components
- Upper gear unit: a
- Propeller for duoprop drives: b-propellers
- Greaser and stuffing box: d=45mm
- Alternator 14v 50a, components
- Upper gear unit: b
- High speed pitot tube log kit
- Propeller for duoprop drives: c-, e-propellers
- Shaft coupling, clamp type: 853794
- Charging distributor
- Intermediate housing
- Intermediate housing
- Electronic speed and distance log kit
- Propeller cone kit, m16: a
- Shaft coupling, clamp type: 853795
- Tank meter kit for fresh water
- Lower gear unit
- Starter motor: a
- Control unit for digital/analog trim instrument
- Propeller cone kit, m16: b
- Rudder indicator kit, 290 drive
- Shaft coupling, clamp type: 853796
- Duoprop drive unit: ratio 1.59:1
- Starter motor, components
- Air pressure gauge
- Propeller cone kit, m20
- Bronze propeller and zinc anode, acc. to iso-std
- Duoprop drive unit: ratio 1.68:1
- Greaser and stuffing box
- Duoprop drive unit: ratio 1.78:1
- Stern bearing: d=30mm, 35mm
- Upper gear unit
- Reverse gear: ratio 1.96:1
- Stern bearing: d=40mm, 45mm
- Reverse gear: ratio 2.62:1
- Propeller shaft stuffing box: d=30mm
- Lower gear unit: ratio 1.59:1
- Shaft coupling, clamp type: d=35mm
- Flywheel housing and primary shaft