Volvo Penta TAMD42B Marine Diesel Parts
- Sales region
- General
Difficulties in parts search?
-
Bilge pump and engine room fan
-
Engine mounting: kamd42b/hs1a
-
Extra instrument panel, hour meter and volt meter
-
Fuel filter and water separator, rina-approved
-
Fuel filter and water separator, rina-approved
-
Fuel filter and water separator, rina-approved
-
Handle for control with power trim: top installation
-
Hot water outlet
-
Induction and exhaust manifold: a
-
Lubricating system: a
-
Propeller shaft stuffing box: d=35mm
-
Repair kits
-
Steering system sts330
-
Alarm panel
-
Engine mounting: kamd42b/borg warner
-
Handle for control with power trim: side installation
-
Lower gear unit: ratio 1.68:1
-
Oil pump, components
-
Parallel rod for twin installation
-
Tool kit
-
Turbocharger and air filter
-
Water heater
-
Connecting kit for narrow hulls
-
Control connection, speed and stop control: single station
-
Electrical system
-
Extra pulley: type hc50
-
Fuel system: a
-
Oil filter
-
Sea water filter
-
Shaft coupling, clamp type: d=40mm
-
Turbocharger, components
-
Compressor, components
-
Control cables, type 233, 333, 443: type 233
-
Exhaust and cooling water pipe
-
Extra pulley: type b
-
Fuel filter
-
Link rod kit for twin installation
-
Oil cooler
-
Oil cooler, components
-
Rudder indicator kit for reverse gear
-
Control connection, speed and stop control: fly bridge
-
Cylinder head: a
-
Electric bilge pump 12v/24v: 12v
-
Exhaust thermo switch control
-
Fuel injection pump, components
-
Fuel injection pump, components
-
Fuel injection pump, components
-
Heat exchanger
-
Instrument panel 12v
-
Instrument panel 12v
-
Instrument panel 12v
-
Propeller shaft stuffing box: d=40mm
-
Steering and steering cylinders for single inst.
-
Clock kit
-
Control cables, type 233, 333, 443: type 333
-
Cylinder block and flywheel housing: a
-
Electric bilge pump 12v/24v: 24v
-
Lower gear unit: ratio 1.78:1
-
Steering and steering cylinders for twin inst.
-
Water cooled silencer and exhaust line
-
Water pump: a
-
Control for side installation, pc740: pc740
-
Hydraulic cylinders and ground cable kit
-
Instrument panel for dual station
-
Regulator
-
Servo pump and oil cooler for single installation
-
Thermostat housing: a
-
Timing gear casing and gears: a
-
Aftercooler: a
-
Camshaft and valve mechanism
-
Control cables, type 233, 333, 443: type 443
-
Servo pump and oil cooler for twin installation
-
Shaft coupling, clamp type: d=45mm
-
Tank meter kit for fuel
-
Tank meter kit for fuel
-
Control for side installation, pc740: pc740, sailing boat
-
Crank mechanism: a
-
Fuel tank 40l, with connections
-
Instrument panel for dual station, 12v
-
Propeller shaft stuffing box
-
Sea water pump: a
-
Servo pump
-
Drive extension: 1' (25.4mm) dp
-
Dual station unit
-
Fuel filter and water separator
-
Fuel filter and water separator
-
Fuel filter and water separator
-
Instr. panel for twin engine install. mirror-invert
-
Sea water pump, components
-
Control for side installation, pc840
-
Expansion tank
-
Expansion tank
-
Hydraulic pump and trim instrument
-
Alternator
-
Control for top installation, pc740: single
-
Shaft coupling, locking pin: d=35mm
-
Control for top installation, pc740: twin
-
Drive extension: 4' (101.6mm) dp
-
Oil level guard, 12v
-
Vacuum valve
-
Control for top installation, pc840: 853168
-
Instrument panel 2-pole
-
Sea water filter and water intake
-
Shaft coupling, flexible
-
Control for top installation, pc840: 853169
-
Extra alternator
-
Extra alternator
-
Transom shield
-
Transom shield
-
Emergency stop contact
-
Handle for control
-
Shaft coupling, locking pin: d=40mm
-
Control for side installation, pc741, pc841: pc741
-
Drive extension: 1'' (25.4mm) dpx
-
Control for side installation, pc741, pc841: pc741, sailing boat
-
Main battery switch
-
Shaft coupling, locking pin: d=45mm
-
Control for side installation, pc741, pc841: pc841
-
Duoprop drive unit ratio 1.78:1
-
Control for top installation, pc840 power trim
-
Electrical materials
-
Electrical materials
-
Electrical materials
-
Propeller for duoprop drives: a-propellers
-
Greaser and stuffing box: d=40mm
-
Instruments for separate mounting
-
Alternator 14v 60a, components
-
Upper gear unit: a
-
Propeller for duoprop drives: b-propellers
-
Greaser and stuffing box: d=45mm
-
Alternator 14v 50a, components
-
Upper gear unit: b
-
High speed pitot tube log kit
-
Propeller for duoprop drives: c-, e-propellers
-
Shaft coupling, clamp type: 853794
-
Charging distributor
-
Intermediate housing
-
Intermediate housing
-
Electronic speed and distance log kit
-
Propeller cone kit, m16: a
-
Shaft coupling, clamp type: 853795
-
Tank meter kit for fresh water
-
Lower gear unit
-
Starter motor: a
-
Control unit for digital/analog trim instrument
-
Propeller cone kit, m16: b
-
Rudder indicator kit, 290 drive
-
Shaft coupling, clamp type: 853796
-
Duoprop drive unit: ratio 1.59:1
-
Starter motor, components
-
Air pressure gauge
-
Propeller cone kit, m20
-
Bronze propeller and zinc anode, acc. to iso-std
-
Duoprop drive unit: ratio 1.68:1
-
Greaser and stuffing box
-
Duoprop drive unit: ratio 1.78:1
-
Stern bearing: d=30mm, 35mm
-
Upper gear unit
-
Reverse gear: ratio 1.96:1
-
Stern bearing: d=40mm, 45mm
-
Reverse gear: ratio 2.62:1
-
Propeller shaft stuffing box: d=30mm
-
Lower gear unit: ratio 1.59:1
-
Shaft coupling, clamp type: d=35mm
-
Flywheel housing and primary shaft